52
6 Stereo measurement procedures (RX (stereo measurement function) only)
6.1 Measurement Flow
The following shows measurement procedures and the screen flow.
Measurement
(See P. 63)
Capturing measurement area
(See P. 60)
Live screen
Observing measurement area.
For procedures to select
the monocular view or the
binocular view of the live
screen, see "5.2 Using the
live screen/freeze screen"
(P. 44).
Spot ranging screen
Check the distance
to the measurement
area before mea-
surement.
Measurement screen
Measure the length
or the area.
Registering the new stereo optical adapter
or re-registering the stereo optical adapter
(See P.54)
Selecting the registered
stereo optical adapter
(See P.57)
Attaching the stereo optical adapter
(See P.53)
Checking measurement values (before measurement)
(See P. 58) *
Checking measurement values (after measurement)
(See P. 58) *
* Make sure that the measurement values obtained when “Checking measurement values (before
measurement)” and when “Checking measurement values (after measurement)” are almost
identical. If the measurement values differ from each other, check that the optical adapter is not
loose and the lens is not dirty and, if required, re-register the stereo optical adapter.
Monocular view type
Binocular view type
[W]
[MEAS/ENTER]
or [W]
MENU/EXIT
[LIVE/GAIN]
MENU/EXIT
[LIVE/GAIN]
[MEAS/ENTER]
[MEAS/ENTER]
[LIVE/GAIN],
[T] or [W]
