24
3 Pre-observation/pre-operation preparation and inspection
Securing the insertion tube to move the instrument to another location
Attaching the optical adapter case holder
The insertion tube can be coiled with the insertion tube fastening belt when moving the instrument
to another observation location.
After coiling the insertion tube, wrap it with the insertion tube fastening belt near the insert tube
bend stopper.
Transport the instrument by holding the main unit or by hanging it from the strap.
1
Pass the Hook & Loop fastener of the optical adapter case holder through the
ring on the shoulder strap.
2
Fold the Hook & Loop fastener over to fasten it as shown in the diagram.
Stow the instrument in its carrying case when moving or transporting it over long distances.
Pull apart the Hook & Loop fastener and remove it from the ring.
Removing the optical adapter case holder
Hook & Loop fastener
Ring
