22
3 Pre-observation/pre-operation preparation and inspection
Back attachment: For transport
Side attachment: For observation
Mounting of the control unit on the main unit
1
Insert the hanger on the
side of the control unit
straight into the control unit
holder on the side or the
back of the main unit.
2
Push in the hanger until
you feel a click.
Pull the control unit straight upward from the main unit.
When the control unit is affixed to the back of the main
unit, hold down the center of the lock release button as
you pull upwards.
Detaching the control unit
●
When putting down the main unit while the control unit is attached to it, always place it on its side or base.
●
Do not use excessive force or twist the control unit when it is attached to the main unit.
CAUTION
Hanger
Handle
Control unit holder (rear)
Control unit holder
(side)
Lock release button
