3
1.
Make sure that the IPLEX LX/LT/MX II/TX is turned OFF.
2.
Connect the output cable plug of the AC adapter to the AC adapter connector of the IPLEX
LX/LT/MX II/TX.
3.
After connecting the power cord to the AC power inlet on the AC adapter, firmly connect the
power cord plug to a 3-pin AC mains outlet.
NTSC:AC power cord is only used for 100 - 120 V AC, 50/60 Hz. If the instrument is
operated with AC power cord into inappropriate AC power inlet, fire or electric shock
may result.
PAL:AC power cord is only used for 220 - 240 V AC, 50/60 Hz. If the instrument is
opated with AC power cord into inappropriate AC power inlet, fire or electric shock may
result.
Disposal After Use
When disconnecting a cable or cord, always hold the plug part. Never hold the cable
or cord itself, as wire breakage may occur.
1.
Ensure that the power switch of the IPLEX LX/LT/MX II/TX is turned OFF.
2.
Disconnect the power cord plug from the AC mains outlet.
3.
Disconnect the output cable plug of the AC adapter from the AC adapter connector of the
IPLEX LX/LT/MX II/TX.
8
Storage
• The performance of some kind of electric parts will be deteriorated by the gas including
the halide contained in the insecticide, the herbicide,and the gas extinguishant, etc. Do
not store the equipment in a place subject to the gas including halide. Doing so could
damage the equipment.
• Store the unit in a clean, dry place under normal temperature. To prevent malfunction,
do not store it in environments exposed to high temperatures, high humidity, direct
sunlight, radioactive rays, dust or other particulates.
3-pin putlet
IPLEX LX/LT/MX II/TX
Power cord
Output cable
CAUTION
WARNING
CAUTION
Downloaded from
