Olympus IPLEX G Lite, Инструкция по эксплуатации

Страница: 102 / 116

Problem Cause and recommended action
The image brightness is
not optimal.
The objective lens of the distal end of the insertion tube or the
optical adapter is dirty, or the illumination on the optical adapter
is dirty.
→
Wipe with a clean piece of gauze or a cotton swab.
The automatic brightness control is not set appropriately.
→
Use the [BRT] lever to adjust it to the appropriate setting.
The external monitor is not adjusted appropriately.
→
Adjust the external monitor appropriately.
The optical adapter is loose.
→
Attach the optical adapter properly (see “Attaching and
removing the optical adapter” (page 24)).
Color reproduction is poor. The white balance is not set properly.
→
Adjust white balance again.
The noise is noticeable on
the image.
The automatic brightness control is not set appropriately.
→
Use the [BRT] lever to adjust it to the appropriate setting.
Dynamic Noise Reduction is not set to ON.
→
Adjust the noise reduction to the appropriate setting in
[DYNAMIC NOISE REDUCTION] in the [IMAGE MODE] menu.
The screen is not
displayed. (The screen is
not displayed properly.)
Set the [POWER] button ( ) of the main unit to OFF and set the
[POWER] button to ON again to restart this instrument.
8-2 Requesting repair of this product
Contact Olympus when you request repair of this instrument. Include a detailed description of
the malfunction and the conditions under which it occurs when returning the instrument.
Malfunctions that occur during the warranty period are repaired at no charge according to the
warranty agreement. Be sure to attach the warranty agreement when returning the instrument
for repairs. The repair will be charged if the warranty agreement is not attached. The freight fees
are paid by the user even if repairs are done free of charge.
Olympus will not repair an instrument contaminated by noxious substances.
94