Olympus IPLEX FX IV8000-2 Скачать руководство пользователя страница 183

Страница: 183 / 208

175

Chapter 9 Troubleshooting

General troubles during operation

Problem

Possible cause

Remedy

The illumination
does not light.

The [LIGHT] button is not on.

Turn on the [LIGHT] button.

The optical adapter is attached
improperly.

Attach the optical adapter properly.

Electrodes on the optical adapter or
the scope distal end are dirty.

Wipe them clean using a soft piece of
gauze, a cotton swab, or a brush. See
“Inspecting the scope distal end”
(page 39) an d “Inspecting the optical
adapter optics and connecting screw
threads” (page 51).

The LED on the distal end of the
optical adapter is out.

Replace the optical adapter.

The illumination
is dim.

The optical adapter tip is dirty.

Wipe with a clean piece of gauze or a
cotton swab.

Extended use under high ambient
temperatures causes decreased light
emissions.

Replace the optical adapter.

The optical
adapter cannot
be attached to
the scope.

A foreign object is stuck to the screws.

Wipe them with a clean piece of
gauze or cotton swab.

The optical adapter in use is not a
designated optical adapter for this
system.

Use a designated optical adapter.

You are not using the proper
installation procedure.

Redo it correctly (See “Attaching and
detaching the optical adapter” (page
52).)

The optical
adapter cannot
be removed
from the scope.

The nut of the optical adapter is
rotated in the wrong direction.

Redo it correctly (See “Attaching and
detaching the optical adapter” (page
52).)

The system
cannot be
turned on.

The AC adapter or the battery is not
connected.

Connect the AC adapter or the battery
correctly. (See “3.4 Preparing the
power supply” (page 36).)

The [POWER] button is not set to on.

Set the [POWER] button of the base
unit to on.

A non-designated AC adapter or
battery is connected.

Use the designated AC adapter or
battery.

The scope unit is not connected
improperly.

Connect the scope unit properly.

Содержание IPLEX FX IV8000-2

















































































































































































































Результаты поиска

Содержание IPLEX FX IV8000-2

Отзывы:

Olympus IPLEX FX IV8000-2, Инструкция по эксплуатации, Страница: 183 / 208

Результаты поиска

Содержание IPLEX FX IV8000-2

Отзывы: