Olympus IM027, Инструкция по эксплуатации

Страница: 175 / 342

175
EN
Shooting Settings
4
Recording pictures with varied white balance (WB BKT)
PA S M B
n
The camera varies white balance to record a series of pictures. You choose the color
axis and the bracketing amount.
Shooting ends after a single shot. The camera takes one picture when the shutter
button is pressed all the way down and automatically processes it to record the
pictures.
Menu
MENU
n
‘
n
3. Bracketing
n
WB BKT
A-B
Select the bracketing amount for the A-B (amber–blue) axis.
[Off]
/
[3f 2Step]
/
[3f 4Step]
/
[3f 6Step]
G-M
Select the bracketing amount for the G-M (green–magenta) axis.
[Off]
/
[3f 2Step]
/
[3f 4Step]
/
[3f 6Step]
Three pictures are created for each color axis.
The first copy is recorded at current white balance settings, the second using a
negative value for compensation, and the third using a positive value.
•
If white balance fine-tuning is enabled before shooting begins, the camera will vary white
balance around the selected value.
# White balance bracketing cannot be combined with art filter bracketing (P. 177) or focus
bracketing (P. 178).
Recording pictures with varied flash level (FL BKT)
PA S M B
n
The camera varies flash level (output) over a series of shots. You choose the amount
of variation. The camera takes a shot at a new flash level each time the shutter button
is pressed all the way down. Bracketing ends after the required number of shots has
been taken. In burst shooting modes, the camera will take pictures while the shutter
button is pressed all the way down, ending when the required number of shots has
been taken.
Menu
MENU
n
‘
n
3. Bracketing
n
FL BKT
Off
Pictures are taken without using this function.
3f 0.3EV 3 pictures are taken with the bracketing amount of 0.3 EV.
3f 0.5EV 3 pictures are taken with the bracketing amount of 0.5 EV.
3f 0.7EV 3 pictures are taken with the bracketing amount of 0.7 EV.
3f 1.0EV 3 pictures are taken with the bracketing amount of 1.0 EV.
“BKT” is displayed in green until all the shots in the bracketing sequence have been
taken. The first shot is taken at current flash settings, followed first by the shot with
reduced flash output and then by the shot with increased flash output.
% If you change the [EV Step] setting (P. 107), the bracketing amount of flash also
changes.
•
If flash compensation is enabled before shooting begins, the camera will vary flash output
around the selected value.
#
Flash bracketing cannot be combined with exposure bracketing (P. 174) or focus
bracketing (P. 178).