139
EN
Shooting Settings
4
Displaying camera motion on the monitor
(Handheld Assist)
PA S M B
n
You can configure the camera to
display the motion of the camera and
the boundaries of motions that can be
corrected by the image stabilizer when
the shutter button is pressed halfway
and during exposure. This is useful
when you want to reduce camera
motion during long exposure with the
camera held by hand.
1
1023
1023
P
1/
250
P
1/
F
250
5.6
5.6
1
1
[1:02:03]
[1:02:03]
FF
60p
60p L-8
L-8
S-AF
S-AF
33
200
200
L
1
4K
ISO
Auto
ISO
Auto
F
00
+
-
0.0
0.0
100 %
100 %
r
r O
O
Camera
motion
(horizontal/
vertical)
Camera
motion (roll)
The boundaries of motions
that can be corrected by
the image stabilizer (gray)
Menu
MENU
n
_
n
8. Image Stabilizer
n
Handheld Assist
Off
Camera motion is not displayed on the monitor.
On
Camera motion is displayed on the monitor when the shutter button
is pressed halfway and during exposure.
#
There is no guarantee that the picture will be without blurs, even if the camera motion
indicator stays within the gray frame.
#
Camera motion cannot be displayed correctly when the camera is close to the subject.
#
Camera motion is not displayed if [
K
Image Stabilizer] is set to [Off] or if you are using
third-party lenses, with which only the lens image stabilizer operates.
#
If [
a
Image Stabilizer] is set to [Off], camera motion is only displayed during exposure.
Image Stabilization for IS Lenses
(Lens I.S. Priority)
PA S M B
n
When using a third-party lens with an on-board image stabilizer, choose whether image
stabilization gives priority to the camera or the lens.
#
This option has no effect if the lens is equipped with an IS switch that can be used to
enable or disable image stabilization.
Menu
MENU
n
_
n
8. Image Stabilizer
n
Lens I.S. Priority
On
Priority is given to lens image stabilization.
Off
Priority is given to camera image stabilization.
