Me
nu operati
o
ns
EN
27
You can select a language for on-screen display. Available languages vary depending
on the area where you purchased this camera.
You can add other languages to your camera with the provided OLYMPUS Master
software.
The pixel mapping feature allows the camera to check and adjust the CCD and image
processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. Wait at least one minute after taking or
viewing pictures to allow the pixel mapping function to perform properly. If you turn the
camera off during pixel mapping, start again.
Select [PIXEL MAPPING] and when [START] is displayed, press
i
.
You can turn on the power by pressing either
K
or
q
.
W
................................................................................... Selecting a display language
PIXEL MAPPING
........................................Adjusting the image processing function
K
/
q
........................................................................ Turning on the power with
K
/
q
YES/ NO
s
................................................................................Changing the monitor brightness
BRIGHT/ NORMAL
BEEP
................................. Adjusting the volume of beeps when buttons are pressed
OFF (No sound) / LOW/ HIGH
8
..............................................................Adjust the volume of camera warning sound
OFF (No sound) / LOW/ HIGH
SHUTTER SOUND
.................................Adjusting the volume of the shutter button
OFF (No sound) / LOW/ HIGH
Содержание FE 220 - Digital Camera - Compact
Страница 76: ...VH935101 ...