26
EN
Me
nu operati
o
ns
The pixel mapping feature allows the camera to check and adjust the CCD and image
processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. Wait at least one minute after taking or
viewing pictures to allow the pixel mapping function to perform properly. If you turn the
camera off during pixel mapping, start again.
Select [PIXEL MAPPING] and when [START] is displayed, press
H
.
You can turn the power on by pressing either
K
or
q
.
The date and time is saved with each image, and is used in the file name. If you do
not set the date and time, the [
X
] screen appears every time the camera is turned on.
• The first two digits of the year are fixed.
• The time is displayed in the 24-hour format.
• To set the time precisely, with the cursor either “minutes” or [Y/M/D], press
H
as
the time signal strikes 00 seconds.
PIXEL MAPPING
........................................Adjusting the image processing function
K
/
q
.....................................
Turning on the camera with the
K
or
q
button
YES/
NO
s
........................................................................... Adjusting the brightness of monitor
BRIGHT/
NORMAL
BEEP
........................................ Adjusting the volume of beep when button is pressed
OFF (No sound) /
ON
X
..............................................................................................Setting the date and time
MENU
CANCEL
X
Y / M / D
Y / M / D
Y M D T I M E
Y M D T I M E
----.--.-- --:--
----.--.-- --:--
Y-M-D (Year-Month-Day)
Cancel the setting
Minute
Date formats (Y-M-D,M-D-Y,D-M-Y)
Hour
Содержание FE-210/X-775
Страница 72: ...VH929602...
