54
Flash shooting
V
ar
io
us shooting functions
3
Using the external electronic flash
Be sure to attach the flash to the camera before turning on the flash's power.
1
Remove the hot shoe cover by
sliding it in the direction
indicated by the arrow in the
illustration.
•
Keep the shoe cover in a safe
place to avoid losing it, and put it
back on the camera after flash
shooting.
2
Attach the electronic flash to
the hot shoe on the camera.
•
If the lock pin is protruding, turn
the shoe lock ring as far as it will
go in the direction opposite to
LOCK. This will pull the lock pin
back inside.
3
Turn on the flash.
•
When the charge lamp on the
flash lights up, charging is
complete.
•
The flash will be synchronized
with the camera at a speed of
1/180 sec. or less.
4
Select a flash mode.
Lock pin
Lock ring
s0003_e_advanced.book Page 54 Wednesday, December 28, 2005 2:33 PM
