manualshive.com logo in svg

Olympus EPOCH 1000 Series, Руководство пользователя

Поделиться
Скачать
Olympus EPOCH 1000 Series Скачать руководство пользователя страница 194

910-269-EN, Rev. B, June 2011

182    Chapter 10

  

When a file ID is highlighted, the following parameters become available at the 
bottom of the setup page:

Recall

Used to recall all parameter settings within the highlighted ID as the live 
parameter settings.

Clear

Used to clear the data for the selected ID.

To USB

Used to create an HTML format report on a connected USB storage device for the 
contents of the highlighted ID.

10.3.3

Saving Data to Files

The EPOCH 1000 Series allows you to save data whenever there is an active file 
(survey) and an ID has been entered. Files are created by choosing 

5/5 > Files > Create 

as described in section 10.3.1 on page 177, or in GageView Pro and transferred to the 
instrument. Pressing 

[SAVE]

, saves the data within the active file.

If there is no active ID, the instrument displays the error message “No active ID” 
at the top of the display. You must have an active file (survey) and an ID entered 
before saving data. For more information, see section 10.3.2 on page 179.

When you press 

[SAVE]

, the EPOCH 1000 Series saves the following information:

•

Filename

•

ID

•

Up to 6 measurement readings (operator selected)

•

A-scan waveform

•

S-scan image (Phased Array Mode only)

•

All instrument setup parameters

•

Alarm information

•

Any display flags

•

Gate measurement mode icons

Downloaded from 

ManualsNet.com

 search engine

Содержание EPOCH 1000 Series













































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды