1
1
STOP
button
+−
button
9
0
button
OK
button
F
button
Se
tti
ng t
im
e a
nd d
at
e
1
Select [
Time & Date
] from the
menu in [
Device Menu
].
• [
Time & Date
] will appear on the
display.
• For details on menu settings, please
refer to P. 44, P.45.
• The “
hour
” will flash on the display,
indicating the start of the Time and
Date setup process.
The following steps are the same as Step 1
through Step 3 of “
Setting time and date
[Time & Date]
” (
☞
P.20).
Changing the time and date
While the recorder is during stop mode,
press and hold the
STOP
4
button to display
the [
Time & Date
], and [
Remain
]. If the
current time and date is not correct, set it
using the procedure below.
2
Press the
F
or
STOP
4
button to
close the menu screen.
Notes
• If you press the
OK
button during the
setup operation, the recorder will save the
items that were set to that point.
• After setup, a message will sound saying
that If the guidance is not required, select
[
Off
], and the screen goes into [
Voice
Guide
] (
☞
P.68) setup. If you don’t want
the guidance feature, select [
Off
].
Setting time and date [Time & Date]
