Shooting mode and playback mode
9
Ba
sic
opera
tio
n
1
(
Turning the camera on in playback mode
Slide the POWER switch to
q
.
• The camera turns on in playback mode. The last picture taken is displayed on the
monitor.
To turn the camera off
→
Slide the
POWER
switch to OFF. The monitor turns off.
To enable shooting mode
→
Slide the
POWER
switch to
K
, pressing and holding the lock button. The lens
extends, and shooting mode is enabled. Slide the
POWER
switch to
q
to return
to playback mode. The lens remains extended.
Note
• When the power is turned on, sometimes the monitor flashes before displaying
the picture. This is not a malfunction.
• To save battery power, the camera turns off automatically if not used for 3
minutes.
POWER
switch
In this manual, the following icons indicate the
POWER
switch necessary for
operating functions.
This indicates an operation when the
POWER
switch is set
to
K
.
This indicates an operation when the
POWER
switch is set
to any of the
K
q
modes.
Shooting mode/Playback mode notation
d4255_e_00_0_bookfile.book Page 9 Monday, June 6, 2005 11:08 AM