Flash shooting
35
3
B
asi
c sh
o
o
ti
ng
fu
ncti
on
s
1
Press
d
(
#
).
• The current flash setting is displayed.
2
Press
d
(
#
) to change the flash
mode to your desired setting.
• Each time you press
d
, the flash mode
changes in the following sequence:
"Auto-flash" - "
!
Red-eye reduction
flash" - "
#
Fill-in flash" - "
$
Flash off".
3
Press the shutter button halfway.
• In conditions where the flash will fire,
#
lights (flash stand-by).
4
Press the shutter button fully to
take the picture.
TIPS
The
#
(flash charge) mark blinks.
→
The flash is charging. Wait until the
#
mark lights continuously.
Note
• The flash does not fire in the following situations:
Sequential shooting, super macro, or panorama.
• The flash may not give you the optimum result in macro mode with the zoom
set to wide-angle (W). Check the resulting picture on the monitor.
#
mark
d4255_e_00_0_bookfile.book Page 35 Monday, June 6, 2005 11:08 AM