Flash shooting
42
3
Basi
c shooti
ng
functi
ons
1
Press
d
#
.
• The flash mode settings screen is displayed.
g
“How to use the direct buttons” (P. 13)
2
Select a flash mode, and press
Z
.
3
Press the shutter button halfway.
• In conditions where the flash will fire,
#
lights (flash stand-by).
4
Press the shutter button fully to
take the picture.
TIPS
The
#
(flash charge) mark blinks.
→
The flash is charging. Wait until
#
turns off.
Note
• The flash does not fire in the following situations:
Sequential shooting, super macro or panorama.
• The flash may not give you the optimum result in macro mode with the zoom
set to wide-angle (W). Check the resulting picture on the monitor.
FLASH MODE
SELECT
GO
OK
The flash fires automatically
in low light.
AUTO
HQ
HQ
2288
2288 1712
1712
55
#
mark