56
4
Fl
as
h
4 Flash
Flash shooting
Select the flash mode best suited to the light conditions and the effect you
want to achieve. You can also adjust the amount of light emitted using the
flash intensity control.
1
Press the flash button. ( )
• The flash pops up. ( )
2
Set the flash mode by repeatedly
pressing
#
.
• The flash mode changes in the sequence
shown below (when all modes are available).
• If no operation is performed for about 3 seconds, the flash mode is set
and the mode selector screen is automatically exited.
• To prevent the flash from firing, press down on the top of the flash to
retract it.
Mode dial
Shutter button
#
Flash mode
button
Auto (Auto-flash)
!
(Red-eye
reduction flash)
#
SLOW (Slow
#
(Fill-in flash)
synchronization)
SLOW