52
3
S
hoot
ing ba
sics
Recording movies
This function allows you to record movies. If
R
is set to ON, sound is recorded
at the same time.
1
Set the mode dial to
n
and press
the power switch.
g
• The monitor turns on.
• The available recording time on the card
that you are using is displayed.
2
Decide the composition of the
picture.
• You can use the zoom lever to enlarge
your subject.
3
Press the shutter button fully to
start recording.
• You can adjust the zoom during movie
recording.
• The card access lamp blinks while the
movie is stored on the card.
• During movie recording,
N
lights red.
4
Press the shutter button again to stop recording.
• When the remaining recording time has been used up, recording stops
automatically.
• When there is space in the card memory, the remaining recording time
(
g
P.97) is displayed, and the camera is ready to shoot.
Mode dial
Shutter button
Mode dial
Card access lamp
Power switch
00:36
00:36
00:36
00:10
00:10
00:10
Time remaining