34
Chapter 2
Press the shutter button halfway.
●
When the subject is in focus, the green lamp
blinks once.
Press the shutter button all the way to start
recording.
●
During movie recording,
lights in red.
Press the shutter button all the way again to stop recording.
●
The card access lamp blinks and the camera starts writing the movie to
the card.
●
If the displayed seconds remaining reach “0”, shooting finishes
automatically and the camera starts writing the movie to the card (P. 57).
3
4
5
Recording movies
Seconds remaining
Remove the lens cap. Set the mode dial to
and press
the POWER switch.
1
Point the camera towards a
subject while viewing the
monitor.
2
AF target mark
Card access lamp
P/A/S/M
Power switch
