29
1
Attaching the Illuminator
(Fig. 15)
}Attach the illuminator using the Allen wrench ( ) provided with it.
}Remove the caps of the mounting screws ² using a pair of tweezers, etc.
1. Place the illuminator @ on the mounting surface by slightly deviating the 4
mounting screws ² of the illuminator toward the front of the 4 mounting
screw holes ³ on the microscope frame. For the present, it is not required
to align the illuminator’s mounting screws with the microscope’s mounting
screw holes.
2. Apply the illuminator toward the rear of the microscope frame. The illumi-
nator will fit in the correct position.
3. While maintaining the correct condition by pushing the illuminator toward
the rear, tighten the 4 mounting screws ² by turning it clockwise using the
Allen wrench.
4. Place the caps of mounting screws ² on the original position
2
Attaching the Stage
Tighten the stage clamping screw.
# If the specimen holder of the U-SVRB-4/SVLB-4 biological stage has
been replaced with the stage plate, the back side of the stage plate
may be worn after long period of use because the upside of the bio-
logical stage is ceramic coated.
Fig. 15
@
²
³
