manualshive.com logo in svg

Olympus BIX III, Руководство пользователя

Поделиться
Скачать
Olympus BIX III Скачать руководство пользователя страница 25

10-015490-01EN, Rev. 2, June 2020

Important Information — Please Read Before Use

17

Open Source Software

This product may include (

i

) open source software; and (

ii

) other software whose 

source code is intentionally published (collectively, hereinafter referred to as “OSS”).   

The OSS included in this product shall be licensed and distributed to you subject to 
the terms and conditions applied to the OSS. Please see such terms and conditions of 
the OSS at the following URL:

https://www.olympus-ims.com/btx-terra-open-source-software/

The copyright owners of the OSS are listed at the above URL.

THERE IS NO WARRANTY FOR THE OSS, TO THE EXTENT PERMITTED BY 
APPLICABLE LAW. THE OSS IS PROVIDED “AS IS” WITHOUT WARRANTY OF 
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED 
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND 
PERFORMANCE OF THE OSS IS WITH YOU. SHOULD THE OSS PROVE 
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, 
OR CORRECTION.

Some of the OSS licenses associated with this product may permit you to obtain 
source code for certain software which Olympus has an obligation to provide in 
accordance with the terms and conditions applied to the OSS. You may obtain a copy 
of this source code at the following URL. This offer is valid for a period of three (3) 
years from the date of original purchase. Olympus has no responsibility to provide 
any source code except the source code for certain software.

https://www.olympus-ims.com/btx-terra-open-source-software/

Olympus does not respond to any inquiries related to any of the source codes 
obtained at the above URL.

Warranty Information

Olympus guarantees your Olympus product to be free from defects in materials and 
workmanship for a specific period, and in accordance with conditions specified in the 

Olympus Scientific Solutions Americas Inc. Terms and Conditions

 available at 

http://www.olympus-ims.com/en/terms/.

Содержание BIX III







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды