Olympus 72DL PLUS Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 60

Olympus 72DL PLUS Скачать руководство пользователя страница 13

10-014357-01EN, Rev. 2, January 2022

Important Information — Please Read Before Use

7

Safety Symbols

The following safety symbols might appear on the instrument and in the instruction
manual:

General warning symbol

This symbol is used to alert the user to potential hazards. All safety messages that
follow this symbol shall be obeyed to avoid possible harm or material damage.

Shock hazard caution symbol

This symbol is used to alert the user to potential electric shock hazards. All safety
messages that follow this symbol shall be obeyed to avoid possible harm.

Safety Signal Words

The following safety signal words might appear in the documentation of the
instrument:

The DANGER signal word indicates an imminently hazardous situation. It calls
attention to a procedure, practice, or the like that if not correctly performed or
adhered to will result in death or serious personal injury. Do not proceed beyond a
DANGER signal word until the indicated conditions are fully understood and met.

The WARNING signal word indicates a potentially hazardous situation. It calls
attention to a procedure, practice, or the like that if not correctly performed or
adhered to could result in death or serious personal injury. Do not proceed beyond a
WARNING signal word until the indicated conditions are fully understood and met.

DANGER

WARNING

Downloaded from

«
...
11
12
13
14
15
...
»

Содержание 72DL PLUS





























































Отзывы:

Нет отзывов