GR-750x series
Control panel for addressable emergency
luminaires
Document number: 923750400_09_007
Date: 3/5/2022
Page: 37 of 71
[37]
5.1 TEST
The following options are available when entering the main
TEST
menu (table 16). You can navigate the
menu by swiping on the screen left or right and selecting the option in the middle. All available test procedures
and their configuration can be found in this menu. The panel can perform them automatically or manually.
Table 16
– Test menu options
MENU OPTION
DESCRIPTION
ICON
SET FUNCTION TEST
Configuration of the automatic function test of
the connected points.
SET DURATION TEST
Configuration of the automatic duration test of
the connected points.
START FUNCTION TEST
Sends the command to start a function test at
the points of the selected zone.
START DURATION TEST
Sends the command to start a duration test at
the points of the selected zone.
STOP TEST
Sends the command to stop all running tests on
all connected points.
TEST PRINTER
Sends a test print page to the thermal printer (if
it is available).
TEST LED INDICATORS
Lights up all front panel LED indicators for about
5 seconds.