Date
27/06/2019
Document number
921100400_09_002
Page
54 of 67
54 / 67
5.3.14
Delete points
“
DELETE POINTS
” option is used in order to delete specific point
entries from the memory, all points of a loop or all registered points in
the control panel. The three available options are the following:
-
DELETE SINGLE POINT (delete a single point only)
-
DELETE LOOP (delete all registered points in a loop)
-
DELETE ALL POINTS (delete all registered points)
Figure5-36.Delete points
5.4
General settings
This section contains details regarding the general settings menu.
When selecting “
GENERAL
SETTINGS
” via technician menu, the following options appear:
Figures5-37.General settings menu
5.4.1
Select language
First option, “
SELECT LANGUAGE
”, opens the available languages
window to change control panel’s menu language, including event log
records.
Figure5-38.Select language
5.4.2
Change technician code
“
CHANGE TECH CODE
” option will display the screen on the right,
asking the technician to enter a new code for access level 3. After
inputting the code, the panel asks to enter the new code again for
confirmation.
WARNING
: Changing the
technician’s code is an action that must be
taken responsibly. If the code is lost there is not any possible way to
reset the technician code back to default.
Figure5-39.Change tech code