Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 21
38.
There are 3 different plywood panel sizes used to complete the roof.
- 48” wide x 32” deep (2pcs)
- 48” wide x 21 3/4” deep (2pcs)
- 4” wide x 53 3/4” deep (1pc)
Starting with front left, position a 48” wide x 32” deep panel on rafters. Plywood will overhang outside
rafter by 2”. In the front plywood will be recessed 1/8” back from rafter end.
48”
32”
2” overhang
Plywood 1/8”
from rafter end
39.
With panel correctly positioned, fasten to rafters with 6 - 1 1/4” screws.
40.
Locate a 48” wide x 21 3/4” deep panel. Position on rear rafters, tight to previously installed
piece. Position with same 2” overhang on side and recess 1/8” from rear rafter end.
48”
21 3/4”
