OLT GGC63-TG-CEDAR Скачать руководство пользователя страница 1

Important Information: 

- It is the sole responsibility of the customer to check with your local municipal or county by-laws before  
  ordering this product to confirm it complies with building codes in your area. 
- If the product is elevated, any structural and building code requirements are solely the customer's  
  responsibility, and should be abided by. 

 

- Snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep    
  snow off roof frequently. 
- In areas with high or gusty wind conditions, it is advisable to install the structure securely to the ground. 
- Have a regular maintenance plan to ensure screws, doors, windows and parts are tightly affixed.  
- All structures purchased from Outdoor Living Today are covered for a period of one year for defects in  
  manufacturing and workmanship. Costs incurred for customer installations are not included. 
- Failure to use supplied parts included in this kit could result in poor product performance and may void your     
  warranty. Please contact Outdoor Living Today’s Customer Toll Free Line if you plan to deviate from our   
  written instructions.

Outdoor Living Today                www.outdoorlivingtoday.com             [email protected]

Page 1

Thank you for purchasing a 
6x3 Grand Garden Chalet.  
Please take the time to  
identify all the parts prior to 
assembly. 

6x3 GRAND  

GARDEN CHALET

 

  

WITH CEDAR ROOF

 

ASSEMBLY MANUAL

Version #1.1 
May 3, 2023

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer Support Line  
@ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our commitment to you to courier  
replacement parts, free of charge, within 10 business days of this notification. Replacement parts will not be 
provided free of charge after the 30 day grace period. 

Stock Code: 
GGC63-TG-CEDAR

Customer agrees to hold Outdoor Living Today and any Authorized Dealers free of any liability for improper  
installation, maintenance and repair.

Содержание GGC63-TG-CEDAR






























Отзывы: