April 16/2019
Assembly Instructions for Automatic Watering System
(To Be Added to your Garden in a Box Kit)
You will need the following items to complete the assembly:
1) Pliers
2) Pencil
3) 3/4” Spade Bit
(See Step 3)
4) Screw Driver / Screw Gun with square bit.
5) 2 AA batteries
Note - The irrigation system works best if the psi is between 10 and 80. If the psi is greater than 80, then a
pressure regulator (not included) should be installed before connecting the water source to the garden.
Preparation
Remove the timer, connected fittings and all other parts from the box and review the timer instructions.
