Olsen Vet Cart Premium, Руководство пользователя, Страница: 16 / 36

16
- Vacuum Pump Adaptor (Optional)
This item enables the use of the vacuum pump as a suction device.
The suction holder is provided with a device for automatic ignition and
shutdown of the pump. Furthermore, the handpiece has suction flow
control and adapters for use with

9,5 mm. The adapter tip is cannula
removable (1), allowing the use of cannulas of

11 mm.
To activate suction: Remove the vacuum pump suction (2) from its
holder (2).
To adjust suction flow: To decrease the suction flow, turn adaptor's
body (3), where the blue dots (4) alignment indicates the total opening of
the ejection and, the opposite points indicate the closing of ejection.
To deactivate the suction: Place the vacuum pump in its holder (2).
Note: The vacuum pump and cannulas do not come with this device.
- Air Jet (Optional)
The Air Jet system provides agility in procedures with a high-speed turbine. It consists
of continuous air jet through the turbine itself, eliminating the use of a syringe for this function.
Activation through command at the working table.
To activate/deactivate the Air Jet system: press the button (1) on the left side of the
working table (Air Jet and fiber optic are thrown together).
Technical Features:
- Power Supply: Input 24 VCA and Output 32 VCC;
- Power Rating: 10 W.
6 - General Features
- Mechanical structure: Manufactured in SAE 1020 rolled steel profiles and welded by MIG process, to
guarantee the strength and durability;
- Electrostatic painting: It is applied to all structural metal parts of the equipment. The special
polyurethane paint provides the equipment with high durability coating and has antibacterial properties
according to
JIS Z 2801: 2000 , where in 24 hours, the bacterial reduction is greater than 99.9%.
- Plastic covers: Made of high-strength ABS with acrylic cover, the fairings do not require painting and
allow polishing;
- Electrical system: The equipment can work in frequencies of 50 or 60 Hz and can be configured to be
connected to the voltages of 127/220 Volts by an authorized technician. The maximum supply voltage of
electronic boards, motors, and other controls is 24 V. The electrical system has On/Off switch, and
protection fuses;
- Handpiece holders: Built in ABS, they have vanes to activate the valve of the holder, which interrupts
the operation of the instrument when it is placed in its respective holder.
- Valves
The valves used in the equipment’s hydro -pneumatic system have been developed to ensure its
performance and durability, built in nonferrous metal with chromium coating.
- Command valves: Releases spray to the pneumatic handpiece, with a piston system to achieve
stagnation and non-retraction of water;
- Pressure regulating valves: Guarantee the stability of propulsion pressure of the instruments, also
allowing the adjustment according to the specifications of the handpieces. The factory setting is 2,2 bar
of air pressure and regulated flow of 35 to 55 Liters of air per minute;
- Handpiece holder valves: Also called pilot valves, they release or interrupt the propulsion air to the
handpiece when it is removed from the holder.