LA
B
CH
A
IR
Headres
ts
1º - To adjust the position of the headrest (F7-1/F08-4) turn the
handle knob (F07-2/F08-2) counterclockwise to loosen it and then
adjust it to the desired position. Turn the handle knob (
)
clockwise to lock in the set position;
2º - To adjust the height of the headrest (
) move the
bar (
) until you reach the position. The headrest
bar (
) allows adjustment with up to 17 cm from the
backrest.
F07-2/F08-2
F7-1/F08-4
F7-3/F08-3
F7-3/F08-3
1 -
2 -
3 -
4 -
5 -
Articulated Headrest
Handle Knob
Adjustment Bar
Multiarticulated Headrest
Position for Wheelchair Patients
Lab Chair Quick Operation Guide - Description of Parts and Controls of Equipment
1
2
3
4
2
3
5
F07
F08
F09
Leg R
es
ts
1
2
3
4
Heels Suppor
t
Adjust the heel support (F10-1) according to the patient profile or
procedure to be performed.
1º - To adjust the distance of the heel support (F10-1) simply fit it
into the hole (F10-3) corresponding to the desired distance.
3
2
1
F10
1 -
2 -
3 -
Heel Support
Metal Support
Adjustment Holes
1º - To install the leg rest set, turn the handle knob on the
bracket locks (F03-1), attach the metal support (F04-3),
and then tighten the handle knob again (F03-1);
2º - To engage the leg rest (F04-1), turn the handle
knob (F04-2) and attach the leg rest (F04-1) to the metal
support (F04-3). Tighten the handle knob (F04-2) to
secure the supports (F04-1);
3º - To align the leg rest (F04-1), turn it on the shaft (F06),
for better adaptation to the patient.
F04
F05
F06
1 -
2 -
3 -
4 -
Leg Rest
Plastic Knob
Metal Support
Fixing Points
Brac
k
ets Loc
ks
F03
1
1 -
Plastic Knob
1º - To adjust the height and distance from the seat, turn the
plastic knob (F03-1) counterclockwise to loosen;
2º - To lock the accessory position, turn the plastic knob (F03-1)
clockwise.
1 -
2 -
On/Off Switch with LED
Fuse Holder
Turning On the Equipment :
Electrical P
anel
1º - To turn On the equipment press the On/Off switch (F01-1) to
the "I" position;
2º - The LED on the On/Off switch (F01-1) will turn green,
indicating that the equipment is ready for use;
3º - To turn Off the equipment press the On/Off switch (F01-1) to
the "O" position.
1
2
F01
Chair Base Commands
F02
Page 01 - 5409202 - R00
- Equipments made to last!
Observe the Scheduled Review system for your equipment Chapter 15 of the User Manual Lab Chair.
In case of loss of the user manual contact us by e-mail
informing the serial number of your equipment.
Athe purpose of this guide is to identify commands, parts, and instruments that may be available to the equipment, including optional items.
This guide does not define the equipment configuration that may vary according to the customer's request.
Before using the equipment, please read the
User Manual Lab Chair
carefully.
LA
B
CH
A
IR
Seat Down
Backrest Down
Backrest Up
Seat Up
