EN
19
Electric animal fences intended for deterring birds, household pet containment or training animals such
as cows need only be supplied from low output energizers to obtain satisfactory and safe performance.
In electric animal fences intended for deterring birds from roosting on buildings, no electric fence wire
shall be connected to the energizer earth electrode. A warning sign shall be fitted to every point where
persons may gain ready access to the conductors.
Where an electric animal fence crosses a public pathway, a non-electrified gate shall be incorporated in
the electric animal fence at that point or a crossing by means of stiles shall be provided. At any such
crossing, the adjacent electrified wires shall carry warning signs.
Any part of an electric animal fence that is installed along a public road or pathway shall be identified at
frequent intervals by warning signs securely fastened to the fence posts or firmly clamped to the fence
wires.
The size of the warning sign shall be at least 100 mm × 200 mm.
The background colour of both sides of the warning sign shall be yellow. The inscription on the sign
shall be black
and shall be either
– the symbol of
or the substance of “CAUTION: Electric animal fence”.
The inscription shall be indelible, inscribed on both sides of the warning sign and have a height of at
least 25 mm.
Ensure that all mains-operated, ancillary equipment connected to the electric animal fence circuit
provides a degree of isolation between the fence circuit and the supply mains equivalent to that provided
by the energizer.
NOTE 1 Ancillary equipment that complies with the requirements relating to isolation between the fence
circuit and the supply mains in Clauses 14, 16 and 29 of the standard for the electric fence energizer is
considered to provide an adequate level of isolation.
Protection from the weather shall be provided for the ancillary equipment unless this equipment is
certified by the manufacturer as being suitable for use outdoors, and is of a type with a minimum degree
of protection IPX4.
10. Warranty
This product carries a three (3) year manufacturer warranty for materials and workmanship. The warranty
also covers possible overload situations caused by thunder. The warranty is valid for three (3) years from
the date of purchase on the receipt. To claim the warranty, the customer should return the defect product
to the Manufacturer, reseller or the nearest WZG Service Partner at customer's own expense. The
warranty claim must be accompanied by the description of the fault, copy of the sales receipt and
customer's contact information. The manufacturer / WZG Service Partner will repair or replace the defect
product and return it as soon as possible.
The warranty does not cover any damages that are caused by incorrect or careless use of the product,
installation that does not correspond the provided instructions and other damages which may arise due to
causes beyond the control of the manufacture. Farmcomp does not accept any responsibility for any
direct, indirect or consequential damages that are caused by the use of the product or the fact that the
product could not be used. The liability of Farmcomp is limited to the price of the product in maximum.
IMPORTANT:
Do not open the device! Do not try to repair the device yourself! The above
mentioned actions are strictly forbidden!
Only the manufacturer and authorized service partners
have the right to repair the device.
The manufacture does not accept any responsibility or liability
for the outcome of not following the rules
