Olivetti XZAC4219-03 PR2 plus, Руководство по обслуживанию, Страница: 55 / 160

4-2 XZAC4219-03
4.2
MACHINE SET-UP
The set-up environment is reserved for service engineers and programmers as certain parameters that can be
selected are used to specialize the machine or the option installed and must not be modified. Incorrect
modification by the operator could cause malfunctioning of the printer.
4.2.1
SET-UP ACTIVATION
To access the set-up environment, switch off the machine and then switch it on again holding down the ST1
(Station 1) and ST2 (Station 2) keys of the console.
At the end of the reset phase, insert an A4 format sheet in the front slot: the machine will print the meaning of
the keys in this environment on one line.
The flow charts that indicate the possibility of access to the various parts of the set-up are provided below.
4.2.2
SUPPORTING SOFTWARE
The Software tools are produced using suitable instruments and languages for insertion of the product in the
environments where is connected.
Drivers
Are built on Olivetti native protocol. They comprise the enter range of capabilities that can be managed by
Industry Standard applications.
- reference command set
STD 12/14 PR2 plus
- DLL-Drivers provided WIN NT 4.x/2000, WIN 95/98
- Environment DLL WOSA
Set-up management software
The specific on-line set-up management program includes display of the situation of product settings and the
possibility of operating on all available parameters, including handshaking parameters.
Font and logo management software
This program makes it possible to construct unusual graphic types or particular fonts.