Olivetti XZAC4219-03 PR2 plus, Руководство по обслуживанию, Страница: 48 / 160

3-12 XZAC4219-03
3.7.4
EJECTION OF DOCUMENTS
According to the application program, documents may be ejected as follows:
•
Returning these to where they were introduced manually (feed slot)
•
From the rear slot of the machine, starting from the front feed slot.
The documents ejected from the front feed slot:
•
If less than 100 mm in length, are abandoned by the drive rollers
•
If they are 100 mm or more long, they remain grasped by the last pair of rollers so that sheet does not slip
off the front resting surface.
3.7.5
REPLACEMENT OF THE RIBBON CARTRIDGE
The ribbon cartridge must be replaced when printing is faded or incomplete, or in the case of frequent optical
reading errors of printed documents. This procedure must be carried out with the machine off; however, if
necessary, it can also be carried out with the machine on.
3.7.5.1 REPLACEMENT OF THE RIBBON CARTRIDGE WITH THE PRINTER OFF
Proceed as follows to change the cartridge:
•
Switch off the machine.
•
Open the upper cover of the printer, lifting it up.
•
Lift the upper unit using the specific lever.
Figure 3-9 Lifting of the upper unit of the mechanism