Olivetti XZAC4219-03 PR2 plus, Руководство по обслуживанию, Страница: 39 / 160

XZAC4219-03 Service Manual 3-3
Unpacking and preparation of the printer for use:
•
Remove the machine from the bag.
•
Completely open the upper cover of the printer passing this over the stops so that it is positioned
horizontally (illustration A in the following figure).
•
Rotate the two red plastic brackets used for transport which block the print carriage in the forward position
(illustration B in the figure below).
•
Lift the upper part of the mechanism (illustration C in the following figure), then remove the two clips (in
the order 1-2-3 in the following figure).
Figure 3-2 Removal of transport blocking devices
•
Check that the printer has not been damaged during transport
•
Install the ribbon cartridge.
•
Close the machine.