Olivetti System 12, Руководство по эксплуатации

Страница: 30 / 268

2-12
Before Using the Fax Machine > Quick Setup Wizard
Quick Setup Wizard
In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.
Fax setup items
Step Setting item Description
Reference
Page
1.Dialing/RX
Mode Dialing Mode(Port 1)
*1
Dialing Mode(Port
2)
*1*2
Select the dialing mode according to the line type. 8-10
8-10
Reception Mode Select the reception mode. 8-12
Auto (DRD)
*3
Select the reception pattern. 8-12
2.Local Fax
Information Local FAX Name(Port
1)
Local FAX Name(Port
2)
*2
Register the local fax name printed on the fax on the
receiving system. 8-9
8-9
Local FAX Number(Port
1)
Local FAX Number(Port
2)
*2
Enter the local fax number to be printed on the fax on
the receiving system. 8-10
8-10
Local FAX ID Enter the local fax ID. The local fax ID can limit other
parties with which you can communicate. Enter the four-
digit local FAX ID number. 8-10
TTI Select whether or not to print the local fax information on
the fax on the receiving system. 8-9
3.Sound FAX Speaker Volume Set the volume when selecting [ On Hook ].
Speaker Volume: Volume of the built-in speaker when
the line is connected by selecting [
On Hook ].
8-6
FAX Monitor Volume Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the
line is connected without selecting [
On Hook ] such as in
memory transmission.
8-6
Job Finish Buzzer Emit a sound when a print job is normally completed. 8-6
4.Rings Rings(Normal)
*4
Set number of times to let phone ring before answering
a call. 8-12
Rings(FAX/TEL)
*4
Set number of times to let phone ring before taking over
from the answering machine. 8-12
Rings(TAD)
*4
Set number of times to let phone ring before switching
the FAX and the phone. 8-12