Olivetti PR2 PLUS, Руководство по обслуживанию, Страница: 70 / 172

4-16 Service Manual
XZAC4219-05
If the horizontal magnetic option is present
OPTION HOR. MSRW
Message indicating that the option has been installed. There is no selection and the next selection is printed after
this title. If the hor. magn. / MICR option is present, "
+ MICR " is shown beside "MSRW".
Parameter Values possible Description
STANDARD
DIN/ISO Sets the magnetic standard.
See
page 4-17
ANSI See page 4-17
IBM 3604 * See page 4-16
If the IBM 3604 STANDARD has been configured
Parameter Values possible Description
END-SENTINEL
C * Sets the closing code.
F
DISPLACEMENT
STANDARD *
Sets the position of the magnetic stripe. +10
+ 20
DUPLICATE:
N *
Sets or not duplication of the field.
Y
DOUBLE FIELD
N *
Sets or not control on the two fields recorded.
Y
RETRY
3
Sets read retries.
1
STRIPE HANDLING
NORMAL
Permits fast or normal management of the magnetic
stripe. In the case of normal management, each time
the magnetic stripe is read or written, passbook width is
measured in order to establish the precise position of
the stripe.
FAST
In fast management, the width of the passbook is
measured once only with the procedure described in
the specific chapter and no measurements are made
during reading or writing of the stripe, thus increasing
speed of management of the stripe.