manualshive.com logo in svg

Olivetti PG L2435, Руководство по эксплуатации, Страница: 204 / 222

Поделиться
Скачать
Olivetti PG L2435 Скачать руководство пользователя страница 204

Computer Interface

9-3

Network Interface

Features

Automatic IP address resolution

This feature is compatible with the DHCP/DHCPv6 protocol and allows 
the printer to automatically receive IP addresses from the 
DHCP/DHCPv6 server. 

Management using Web browsers

HTTP pages are incorporated in to the interface, so that a web browser 
can be used to monitor and change a range of settings. The settings can 
be password-protected.

Support for a range of protocols

The SMTP, POP3, SSL, SNMP, IPv6 and NetBIOS over TCP/IP 
protocols are supported for easier printer management and more robust 
security.

Support for IEEE 802.1x

The interface supports EAP-TLS and PEAP authentication.

Supports IPv6

Supports IPv6, which is based on IPv4 with improvements, such as 
increased manageable address space, additional security functions and 
priority based data transmission.

Supports IPSec

Supports IPSec, the security protocol that authenticates and encrypts in 
the network layer (IP layer).

Specifications

Connector

10 Base-T/100 Base-TX/1000 BASE-T

Operating Systems

Windows XP/Vista/7/8/Server2003/2008/2012 R2, MacOS 10.5 or later

Network protocols

• IPv6:  HTTP, HTTPS, LPD, FTP, IPP, RawPort, ICMPv6, LLTD, SNTP,

DHCPv6, SMTP, POP3, DNS, SNMPv1/v2c/v3, IPPS, WSD

• IPv4:  HTTP, HTTPS, LPD, FTP, IPP, RawPort, ICMP, DHCP, SMTP,

POP3, SNTP, DNS, WINS, NetBIOS over TCP/IP, SNMPv1/v2c/v3,
Bonjour, IPPS, LLTD, WSD

• Etc.: IPX/SPX, NetWare (NDS/Bindery), NetBEUI

Security Protocols

SSL/TLS (HTTPS, IPPS), SNMPv3, EAP-TLS, PEAP, AH, ESP

Содержание PG L2435































































































































































































































Отзывы:

Нет отзывов