Olivetti PG L2435, Руководство по эксплуатации, Страница: 134 / 222

Using the Operation Panel 7-27
Auto Cass. Change (Auto Cassette Change setting)
You can select the following actions when the paper runs out in the
paper source while printing. By default, this feature is
On
.
1
Press

while
Print Settings >
is displayed.
2
Press

or

repeatedly until
>Auto Cass. Change
appears.
3
To change the current paper feed source, press [OK] . A blinking
question mark (
?
) appears.
4
Select
On
or
Off
using

or

.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
MP Tray Priority (The settings for priority paper feed
from the MP tray)
If paper is set in the MP Tray then it is possible for priority to be given to
that MP tray in the paper feed. The default setting is
Off
.
1
Press

while
Print Settings >
is displayed.
2
Press

or

repeatedly until
>MP Tray Priority
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Press

or

to select the desired MP tray priority mode. The list
shows the following MP tray priority mode:
Off
(The printer driver settings are followed.)
Auto Feed
(If Auto is selected in the printer driver and there is
paper in the MP tray then the paper feed will be from the MP tray.)
Always
(If there is paper in the MP tray then the paper feed will be
from the MP tray regardless of what is set in the printer driver.)
5
Press [OK] .
Off The printer displays
Load Cassette #
(# is a cassette
number) or
Load MP Tray
, and stops printing.
Load the paper according to the paper source displayed to
resume printing.
To print from the other paper cassette, press

or

to
display
Use alternative?
, press

or

to select the
desired paper source, and then press [GO] .
On The printer continues printing automatically when the other
paper cassette contains the same paper as the currently-
used paper cassette.
>Auto Cass. Change
? On
Note
You can also configure the Auto Cassette Change in the
Embedded Web Server
RX. Access to the
Embedded Web Server
RX, and
then go to Basic > Defaults > Device Defaults page. For more
information on access to the
Embedded Web Server
RX, refer to the
Embedded Web Server RX User Guide .
>MP Tray Priority
? Off