Olivetti PG L2435 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 222

Olivetti PG L2435 Скачать руководство пользователя страница 7

iv

Legal Information

Notice on Software

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE
PRINTER'S EMULATION MODE. The printer is factory-set to emulate
the PCL. The emulation mode can be changed.

Notice

The information in this guide is subject to change without notification.
Additional pages may be inserted in future editions.

The user is asked to excuse any technical inaccuracies or typographical
errors in the present edition.No responsibility is assumed if accidents
occur while the user is following the instructions in this guide. No
responsibility is assumed for defects in the printer's firmware (contents of
its read-only memory).

This guide, and any copyrightable subject matter sold or provided with or
in connection with the sale of the page printer, are protected by
copyright. All rights are reserved. Copying or other reproduction of all or
part of this guide, or any copyrightable subject matter without the prior
written consent of

Olivetti

Document Solutions Inc. is prohibited. Any

copies made of all or part of this guide, or any copyrightable subject
must contain the same copyright notice as the material from which the
copying is done.

Regarding Tradenames

• KPDL is a trademark of Kyocera Corporation.

• Microsoft, Windows, Windows XP, Windows Server 2003, Windows

Vista, Windows Server 2008, Windows 7, Windows Server 2012,
Windows 8 and Internet Explorer are registered trademarks or
trademarks of Microsoft Corporation in the U.S.A. and/or other
countries.

• PCL is a trademark of Hewlett-Packard Company.

• Adobe Acrobat, Adobe Reader and PostScript are trademarks of

Adobe Systems, Incorporated.

• Ethernet is a registered trademark of Xerox Corporation.

• NetWare is a registered trademark of Novell, Inc.

• IBM is a registered trademark of International Business Machines

Corporation.

• AppleTalk, Bonjour, Macintosh, and Mac OS are trademarks of Apple

Inc., registered in the U.S. and other countries.

• All European language fonts installed in this machine are used under

licensing agreement with Monotype Imaging Inc.

CAUTION

NO LIABILITY IS ASSUMED FOR ANY

DAMAGE CAUSED BY IMPROPER INSTALLATION.

«
...
5
6
7
8
9
...
»

Содержание PG L2435































































































































































































































Отзывы:

Нет отзывов