manualshive.com logo in svg

Olivetti PG L2435, Руководство по эксплуатации, Страница: 191 / 222

Поделиться
Скачать
Olivetti PG L2435 Скачать руководство пользователя страница 191

7-84

Using the Operation Panel

Adjust/Maintenance (Adjust/Maintenance 
selection/setting)

Adjust/Maintenance is used to adjust the print quality and to carry out 
printer maintenance. 

The options available in Adjust/Maintenance are as follows:

• Restart Printer

• Service (for maintenance)

IMPORTANT  

Service

 is primarily a menu used by service person-

nel for maintenance work. There is no need for customers to use this 
menu.

1

Press 

[MENU]

.

2

Press 

 or 

 repeatedly until 

Adjust/Maintenance >

 appears.

Restart Printer

The procedure described below resets the printer’s temporary 
conditions, such as the current page orientation, font, etc., set by 
commands to their default values. Downloaded fonts and macros are 
deleted from the printer’s memory.

1

Press 

 while 

Adjust/Maintenance >

 is displayed.

2

Press 

 or 

 repeatedly until 

>Restart Printer

 appears.

3

Press

 [OK]

. A question mark (

?

) appears.

4

Press

 [OK]

 again. 

Self test

 appears while the printer is resetting

itself, followed by 

Please wait

 and then 

Ready

.

Adjust/Maintenance

>

>Restart Printer ?

Содержание PG L2435































































































































































































































Отзывы:

Нет отзывов