Olivetti PG L22 Special, Руководство по обслуживанию, Страница: 161 / 165

Y103920-3 Service Manual
161
c) Q-Server
The Q-Server is an application to process the print data.
The Q-Server of this system supports multiple file serves. Furthermore, it allows connection of
multiple print servers for one file server.
Setup range
1 to 8 servers
Maximum four
servers
*Maximum 31
characters
Maximum four
servers
*Maximum 47
characters
Maximum 31
characters
2-255 seconds
Shipment from factory
OIxxxxxx
Etherxxxxxx
(Print Server Name)-prn1
NULL
NULL
4
Item
Number of
connected
print serves
Print Server
Name
Printer
Name
File Server
Name
Password
for File
servers
Job Polling
Rate
Description
Indicates the number of print
servers which can be connected
simultaneously. Each print server
need not be started in advance.
Even when the printer is ready for
operation, connection is achieved
only by starting the print server.
Indicates the name of the connected
print server. Each print server name
can be registered up to a maximum
of 31 characters.
The default xxxxxx of the print server
name is set to the lower three bytes
of the MAC address of the print
server.
Overseas: Olxxxxxx
OEM: Etherxxxxxx
The print server name must be
preset on a NetWare server using a
Novell tool.
Takes the form of the above server
name followed by -prn1, by default.
Entered with the name of a
connecting file server. The file
server is that whose settings have
been set using a Novell tool. The
entry of this file server name is
optional. When the field is left blank,
SoftNIC can automatically discover
and connect a file server to connect
to.
Entered with a password for the
connection to a file server. The
password must be preset on a
NetWare server using a Novell tool.
When this field, which is optional, is
left blank, no password is used for
connection to a file server. In such
cases, the password for the file
server must not be set on the file
server.
Specified with a time interval for
checking whether a job occurs.
When this field, which is optional, is
left blank, the default four seconds
takes effect.