manualshive.com logo in svg

Olivetti PG L22 Special, Руководство по обслуживанию, Страница: 159 / 165

Поделиться
Скачать
Olivetti PG L22 Special Скачать руководство пользователя страница 159

Y103920-3

Service Manual

159

Item

Factory default Setup range

Description

Number of connected clients

Terminal mode

Number of columns

Number of rows

Expiration of idle time

VT-100

80 columns

25 rows

300 sec.

1 client

VT-100

80 columns

25 rows

60 to 7200 sec.

Indicates the number of clients which can be 
connected simultaneously. Allows simultane-
ous connection of a maximum of four clients.

Indicates the control mode of the terminal of 
the connected client.  Only the VT-100 alone 
is the support terminal mode.

Indicates the number of the digits of the ter-
minal of the connected client.  The number of 
the support digits is fixed at 80.

Indicates the number of the digits of the ter-
minal of the connected client.  The number of 
the support digits is fixed at 25.

Indicates the time when the idle time of the 
connected clients expires.

Item

Factory default Setup range

Description

HTTP Version

1.0

1.0

Indicates the version of the HTTP being im-
plemented.

d) Telnet

Telnet is an application to reference and change the menu of the Network/Printer.
The TELNET of this system supports simultaneous connection of multiple clients for the personal
user.  Furthermore, it provides multiple connections for one client.  But it cannot provide two or more
simultanepus connections for super users.

e) HTTP

The HTTP is an application to reference and change the menu of the Network/Printer.
The HTTP of this system supports simultaneous connection of multiple clients for the personal user.
Furthermore, it provides multiple connections for one client.

f) SNMP

SNMP is an application to reference and change the menu of the Network/Printer.
The SNMP of this system supports simultaneous connection of multiple clients for the personal user.
Furthermore, it provides multiple connections for one client.

Содержание PG L22 Special






































































































































































Отзывы:

Нет отзывов