Olivetti PF-P09, Руководство по обслуживанию

Страница: 271 / 457

14. SOFT SWITCH SET Field Service Ver. 1.1 May 2011
228
ADJUSTMENT
/ SETTING
14.3.21 SOFT SWITCH: #21
• Bit 8: Sender machine’s name will show on the other party’s LCD or print on the report
if remote side is the same model.
• Bit 3: Some old machine can not accept DIS command over 4 bytes, and every time
will become fail. In this case can set this bit to 1. If this bit set to 1, JBIG and V8
capability will disable automatically.
• Bit 2-1: T1 indicate the calling time after dialing, can adjust the T1 time more long by
change the default value. The default T1 timer depends on each country regula-
tion.
Bit No. Designation Function
Initial
setting
Bit HEX
8
NSS signal before
DCS
0: Not to send NSS signal for self mode in TX mode
1
8
1: Send NSS signal if remote side is same model
7
CNG sending dura-
tion after dialing
0
6 0
5 T4 timer
0: 3.0 sec. - Normal case
0
1: 4.5 sec.
4
VOIP
(Voice over IP)
0: Disable
0
0
1: Enable
3 DIS signal length
0: Normal length (Bit 1 to 64)
0
1: 4 bytes DIS command. - bit 1 to 32 only
2
Increase default T1
timing during calling
(Only for TX function)
0
1 0
Duration (unit=sec) 40 60 70 120
Bit No. 7 0 0 1 1
Bit No. 6 0 1 0 1
Description (sec) T1 T1 + 30 T1 + 40 T1 + 60
Bit No. 2 0 0 1 1
Bit No. 1 0 1 0 1
d-Color MF2400