Ver.1.0 Mar. 2004
Firmware rewriting
Y103290-2
Service Manual
2-5
II
Ma
in
te
n
a
n
c
e
2.2
Updating procedures of firmware
• When removing the Compact flash, be sure to check if data is written as normal and then
remove it according to the precise removing method.
2.2.1
Updating method
NOTE
• NEVER remove or insert the Compact Flash card with the machine power turned
ON.
1.
With the Power Switch in the OFF
position, unplug the power cord from
the power outlet.
2.
Remove the screw[1] and the metal
Blanking Plate[2].
3.
Insert the Compact Flash card [3]
into the slot.
4.
Plug the power cord into the power
outlet and turn ON the Power Switch.
5.
Six different types of F/W appear on
the Touch Panel.
6.
Select the particular type of F/W
(APP/Font) to be updated.
7. Press the Start key. (At this time, the Start key starts blinking red.)
8. Check that the Touch Panel shows the message indicating that the data has been
rewritten correctly (“Downloading Completed”). Check also the Check Sum value
(“Check Sum XXXX”) shown on the Touch Panel. (The Start key blinks green.)
9. Unplug the power cord from the power outlet.
NOTE
• Do not turn OFF the Power Switch.
10. Remove the Compact Flash card from the slot.
11. Turn OFF the Power Switch.
12. Plug the power cord and turn ON the Power Switch.
13. Call the Tech. Rep. mode to the screen.
14. Select ROM Version.
15. Make sure that the Firmware is updated.
4036fs2602c0
4036fs2603c0
4036fs2604c0