Olivetti FK-502 Скачать руководство пользователя страница 76

Страница: 76 / 194

Field Service Ver. 7.0 Jan. 2009

4. REPLACEMENT PROCEDURE

FK-502/Network Fax

MAINTENANCE

4.4.4

Removal of the speaker (

d-Color

45)

• Replace the speaker in the following order.

NOTE
• Be sure to check to see if the main power switch is turned off.
• The board may be damaged due to static electricity. Be sure to take an appropriate

measure against static electricity before conducting the operations.

Turn off the main power switch and
the power switch of the main body
and then unplug the power cord from
the power outlet.

Open the front door of the main body
and remove the panel cover. (1
screw)

Remove the cover. (1 screw)

Remove the connector, remove two
fixing screws and then remove the
speaker.

NOTE
• When reinstalling the speaker, be

sure to check to see if the speaker
harness on the main body side is
seated securely in the wire saddle.

• Reinstall the above parts following

the removal steps in reverse.

Wire
Saddle

Y104784-2 Service Manual

Содержание FK-502


































































































































































































Результаты поиска

Содержание FK-502

Отзывы:

Olivetti FK-502, Руководство по обслуживанию, Страница: 76 / 194

Результаты поиска

Содержание FK-502

Отзывы: