Olivetti Fax-Lab 470, Инструкция по эксплуатации

Страница: 26 / 64

20
C
HANGING A ONE
-
TOUCH DIALLING KEY OR SPEED DIALLING
CODE
1. Follow the one-touch dialling or speed dialling procedure
until the display shows:
- For one-touch dialling
1:NUM. FAX/TEL
- For speed dialling
O1:NUM. FAX/TEL
2. To delete the display, press the key:
Enter the new telephone or fax number (max. 64 digits).
3. To do so, press the keys:
-
4. To confirm the entry, press the key:
The display shows:
1: NAME
or
01: NAME
5. To delete the display, press the key:
6. Enter the new name (max. 16 characters).
7. To confirm the entry, press the key:
8. To return the fax machine to the stand-by mode, press the
key:
S
ENDING WITH ONE
-
TOUCH DIALING
1. Place the original document in the ADF.
The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NORMAL.
The initial resolution value (even if it is not shown on the
display) is: “
” (standard).
If necessary, change the contrast and resolution values as
described in “
Setting contrast and resolution ”.
2. Pressing the desired numeric key for more than one second:
-
The display shows the fax number stored under it. If the
name has also been saved, the display shows the latter.
Transmission then continues in the normal way.
S
ENDING WITH SPEED DIALING
1. Place the original document in the ADF.
The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NORMAL.
The initial resolution value (even if it is not shown on the
display) is: “
” (standard).
If necessary, change the contrast and resolution values as
described in “
Setting contrast and resolution ”.
2. Press the key:
The display shows:
ADDRESS BOOK
CODE OR < >
Type the desired speed dialling code, for example:
.
3. To do so, press the keys:
-
The display shows the stored fax number. If the name has
also been saved, the display shows the latter.
Once the number has been dialled, transmission continues
in the ordinary way.
T
RANSMITTING WITH ONE
-
TOUCH OR SPEED DIALLING BY
SEARCHING THE PHONE BOOK
If you do not remember the one-touch dialling key or speed
dialling code to which you assigned a given fax number,
you can start sending the document from the phone book
as follows:
1. Place the original document in the ADF.
The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NORMAL.
The initial resolution value (even if it is not shown on the
display) is: “
” (standard).
If necessary, change the contrast and resolution values as
described in “
Setting contrast and resolution ”.
2. Press the key:
The display shows:
ADDRESS BOOK
CODE OR < >
Now locate the fax number or name of the correspondent
to whom you wish to send your document.
3. To do so, press the key:
/
4. To start transmission, press the key: