9-23
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Configuring Guest Property
Register guest user information and functions that are restricted.
1
Display the screen.
1
[
System Menu/Counter
] key > [
User Login/Job Accounting
]
2
"User Login Setting" [
Next
] > "Guest Authorization Set." [
Next
] > "Guest Property" [
Next
]
2
Configure the settings.
Check the settings and change or add information as needed.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login
]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Item
Descriptions
User Name
Enter the name displayed on the user list (up to 32 characters).
The default setting is "Guest User".
Access Level
The authority of the user appears. This cannot be changed.
Account Name
Add an account where the user belongs.
If the user does not belong to any account, select [
Others
].
Model Name
Login User Name
Login Password
d-COPIA 5001MF
5000
5000
d-COPIA 6001MF
6000
6000