Olivetti d-Copia 283MF, Руководство по эксплуатации

Страница: 332 / 438

Default Setting (System Menu)
8-144 OPERATION GUIDE
IPSec Setting
Make this setting when you use IPSec. The default setting is On and that of Rule Setting is also Off .
Use the procedure below to make the setting.
1
In the Sys. Menu/Count. menu, press the
U
or
V
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the
Right Select key).
2
The System menu appears.
3
Press the U or V key to select [Network Setting].
4
Press the OK key. The Network Setting menu
appears.
5
Press the
U
or
V
key to select [IPSec].
6
Press the OK key. IPSec appears.
7
Press the U or V key to select [On] or [Off].
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name:
L b
*******************
Login Password:
[ Menu ] [ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Network Setting:
a b
4
WSD-SCAN
5
WSD-PRINT
*********************
[ Exit ]
6
IPSec
IPSec: a b
*********************
2 On
1 *Off