Setup
4
NETWORK SCANNER SETUP GUIDE
Setting the Current Date and Time
You can also make this setting using COMMAND CENTER.
NOTE:
Periodically check the time that is shown in the message display and adjust
as necessary to match the current time.
1
Press
S
or
T
to select
Year/Time
.
2
Press
Enter.
The date setting screen (year:month:day) is displayed.
3
To set the date, for each field press
S
or
T
as many times as necessary to
display the correct value, then press
X
to move to the next field.
4
When the date is correct, press
Enter
. The time setting screen
(hour:minute:second) is displayed.
5
To set the time, for each field press
S
or
T
as many times as necessary to
display the correct value then press
X
to move to the next field.
6
Press
Enter
. The message display shows
Completed
and returns to the
Date/
Timer Set.
screen.
7
Press
right
Select
. The message display returns to the basic screen.
Содержание d-Copia 18MF Operation
