manualshive.com logo in svg

Olivetti d-Copia 1801MF Plus, Руководство по обслуживанию

Поделиться
Скачать
Olivetti d-Copia 1801MF Plus Скачать руководство пользователя страница 266

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2

1-4-94

1-4-9  Send error code

This section describes the scanning errors and descriptions, preventive actions, as well as corrective actions.
Error codes not described here could fall within software errors.
If such an error is encountered, turn power off then on, and advise the service representative.

(1) Scan to SMB error codes

Code

Contents

Check procedures/corrective measures

1101

Host destined does not exist on the net-
work.

1. Confirm destined host.
2. Confirm device's network parameters.
3. Confirm the network parameters the device is con-

nected.

1102

Login to the host has failed.

1. Confirm user name and password.
2. Confirm the network parameters the device is con-

nected.

3. Check the host if the folder is properly shared.

1103

Destined host, folder, and/or file names 
are invalid.

1. Check illegal characters are not contained within 

these names.

2. Check the name of the folder and files conform with 

the naming syntax.

3. Confirm destined host and folder.

1105

SMB protocol is not enabled.

1. Confirm device's SMB protocols.

2101

Login to the host has failed.

1. Confirm destined host.
2. Confirm that the LAN cable is properly connected to 

the device.

3. Check the SMB port number.
4. Confirm device's network parameters.
5. Confirm the network parameters the device is con-

nected.

2201

Writing scanned data has failed.

1. Check the scanning file name.
2. Confirm device's network parameters.
3. Confirm the network parameters the device is con-

nected.

2203

No response from the host during a cer-
tain period of time.

1. Confirm the network parameters the device is con-

nected.

2. Confirm that the LAN cable is properly connected to 

the device.

Содержание d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды