Olivetti d-Copia 1801MF Plus Скачать руководство пользователя

Страница: 226 / 492

2NC/2NF/2NG/2NN/3P7/3P8/3P9

1-4-54

(10) Image is blurred.

1. Table scanning

2. DP-scanning

Print example

Defective part

Check description

Corrective Action

Rail

Check that the carriage is
smoothly operative.

If the carriage does not travel smoothly,
remove foreign objects on the front and back
optical rails.

Lamp unit

Check that the carriage is
smoothly operative.

If the carriage does not travel smoothly
because the lamp unit contacts with the frame,
rectify.

Scanner drive belt

Confirm that a foreign object
exists between the drive belt and
the scanner drive pulleys.

If a foreign object exists, remove.

Drive belt

Confirm that the drive belt has a
foreign object sticked or has a
scuff.

If a foreign object exists on the drive belt,
remove the foreign object. Or, if it is damaged,
replace.

Defective part

Check description

Corrective Action

DP conveying pul-
ley

Check that the conveying pulley
is smoothly operative.

If the conveying pulley does not rotate
smoothly, re-asslemble the conveying roller
and springs.

Install DP

Check how DP is mounted on
the main unit.

If mounting to the main unit is improper, check
positioning and secure the screws.

DP hinge

Check that the DP hinge is
operative in both ascending and
descending directions and kept
open.

If the DP is not operative smoothly or is not
held stably open, replace the hinges.

DP document mat

Check the location the document
mat of the DP is mounted.

Re-mount the document mat of the DP if it is
hanged off.

Original document

Check that the leading edge of
the original document is dog-
eared.

If the leading edge of the original documet is
dog-eared, straighten.

Scanning guide

Check if the scanning guide is
distorted.

If the scanning guide deformed, replace.

Содержание d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Результаты поиска

Содержание d-Copia 1801MF Plus

Отзывы:

Похожие инструкции для d-Copia 1801MF Plus

Бренды по названию

Популярные бренды

Olivetti d-Copia 1801MF Plus, Руководство по обслуживанию

Результаты поиска

Содержание d-Copia 1801MF Plus

Отзывы:

Похожие инструкции для d-Copia 1801MF Plus

Бренды по названию

Популярные бренды